Okatmos EG 20
Description
Solvent-free, very low emission primer with high bond strength for the preparation of non-absorbent and absorbent substrates as well as over old, load bearing and waterprooof cut back adhesive residue (no bitumen-based cut back adhesive).
Extremely short drying time. For advanced Indoor-Air-Quality. Prevents smell and odors origination in microbial interactions between the floor covering and the application surface, especially in renovation projects. Can be diluted to a maximum of 1:3 with water on concrete substrates
Features
- For install in one day applications
- Solvent free and very low emission
- For absorbent and non-absorbent substrates
- Promotes advanced Indoor-Air-Quality
- Downloads
- Specifications
Colour White Application Interior Application temperature
+ 17°C
Drying time*
approx. 0.5 - 3.0 h
for wooden substrates approx. 24 hfor calcium sulphate-bound screeds/dry screeds min. 24 h if filled with Servoalpha fillers after footing
Floor heating system
Suitable GISCODE D 1 according to TRGS 610
EMICODE EC 1 Plus according to GEV
Storage Store frost-free, can be stored for approx. 12 months
*
At + 20 °C and 65% relative. Humidity. Higher temperatures and lower humidity shorten these values, while lower temperatures and higher humidity lengthen these values accordingly.
- Substrate Preparation
The substrate must be tested and ready for installation in accordance with VOB Part C, DIN 18 365 or DIN 18 356 as well as the state of the art. Pre-treat substrates in accordance with the current BEB information sheet “Assessing and preparing substrates” and information sheet TKB-8.
- Processing
Apply Okatmos® EG 20 to the surface with a lambskin roller or brush. Avoid puddles and layer formation. On cement or calcium sulfate screeds, dilute Okatmos® EG 20 with water in a ratio of 1:1 to 1:3, depending on absorbency. Use Okatmos® EG 20 undiluted on dense, non-absorbent surfaces and wooden surfaces . The hygienising effect remains until diluted 1:1. Only start filling work after it is completely dry.
A system structure must be guaranteed.
- Coverage
- Undiluted 10-13m2 per kg
- 1.1 ratio 20m2 per kg (Standard Concrete Ratio)
- 1.2 ratio 30m2 per kg
- 1-3 ratio 40m2 per kg
- Packaging
- 10kg Plastic Container