Okamul PU
Description
Solvent-free, very low emission, two-component, polyurethane resin adhesive for the installation of LVT, PVC coverings in highstress and high temperature areas, rubber coverings, outdoor and other hard to adhere coverings. Okamul PU has superior bonding properties. Humidity and weather resistant after it has fully hardened
Features
- solvent-free
- multi-purpose adhesive
- easy to spread
- for interior and exterior applications
- suitable over floor heating systems
- suitable for fork lift traffic
- Downloads
- Specifications
Colour Beige Application Interior and exterior
Suitable for chair castors (DIN EN 12529)
Suitable Minimum floor temperature
59 °F (+15 °C)
Mixing ratio
component A and B - complete mix Processing time*
Approx. 60 - 70 minutes
Skin over time* / Tack time
Install immediately into wet adhesive
Walkable*
After approx. 24 - 48 hours
Final strength*
After approx. 3 - 5 days
Floor heating system
Suitable GISCODE RU 1 according to TRGS 610
EMICODE EC 1 according to GEV
Storage Store in dry area for up to 12 months in unopened container.
Preferred storage temperature: +10°C to +20°C.
Please note EC safety data sheet.* At 68 °F (+20 °C) and 65% relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.
- Substrate Preparation
The substrate must comply with the national requirements relevant to country for installation. The surface substrate must be sound and clean. Remove dirt, paint, oil, grease wax or any other contamination which might act as a bondbreaker.
Prime absorbent, porous and dusty substrates with Okapox GF. Level uneven areas with Servoplan leveling compounds. Use Servoplan S 111 leveling compound for industrial (fork lift traffic) areas.
- Processing
The substrate must comply with the national requirements relevant to country for installation. The surface substrate must be sound and clean. Remove dirt, paint, oil, grease wax or any other contamination which might act as a bondbreaker.
Prime absorbent, porous and dusty substrates with Okapox GF. Level uneven areas with Servoplan leveling compounds. Use Servoplan S 111 leveling compound for industrial (fork lift traffic) areas.
- Coverage
- 3.3m2/kg U1
- Packaging
- 3kg or 6kg plastic buckets